net.sf.saxon.dom
Class DOMWriter

java.lang.Object
  net.sf.saxon.event.Builder
      net.sf.saxon.dom.DOMWriter

All Implemented Interfaces:

Result, Receiver

public class DOMWriter
extends Builder

DOMWriter is a Receiver that attaches the result tree to a specified Node in the DOM Document

Field Summary

Fields inherited from class net.sf.saxon.event.Builder

baseURI, config, currentRoot, JDOM_TREE, JDOM2_TREE, lineNumbering, LINKED_TREE, namePool, open, STANDARD_TREE, started, timing, TINY_TREE, TINY_TREE_CONDENSED, UNSPECIFIED_TREE_MODEL

Fields inherited from interface javax.xml.transform.Result

PI_DISABLE_OUTPUT_ESCAPING, PI_ENABLE_OUTPUT_ESCAPING

Constructor Summary

DOMWriter()

Method Summary

void	attribute(NodeName nameCode, SimpleType typeCode, CharSequence value, int locationId, int properties) Notify an attribute.
void	characters(CharSequence chars, int locationId, int properties) Character data.
void	close() End of the document.
void	comment(CharSequence chars, int locationId, int properties) Handle a comment.
void	endDocument() Notify the end of a document node
void	endElement() End of an element.
NodeInfo	getCurrentRoot() Get the current root node.
PipelineConfiguration	getPipelineConfiguration() Get the pipeline configuration used for this document
String	getSystemId() Get the system identifier that was set with setSystemId.
void	namespace(NamespaceBinding namespaceBinding, int properties) Notify a namespace.
void	open() Start of the document.
void	processingInstruction(String target, CharSequence data, int locationId, int properties) Handle a processing instruction.
void	setNextSibling(Node nextSibling) Set next sibling
void	setNode(Node node) Set the attachment point for the new subtree
void	setPipelineConfiguration(PipelineConfiguration pipe) Set the pipelineConfiguration
void	setSystemId(String systemId) Set the System ID of the destination tree
void	setUnparsedEntity(String name, String systemID, String publicID) Notify an unparsed entity URI.
void	startContent() Notify the start of the content, that is, the completion of all attributes and namespaces.
void	startDocument(int properties) Start of a document node.
void	startElement(NodeName nameCode, SchemaType typeCode, int locationId, int properties) Start of an element.
boolean	usesTypeAnnotations() Ask whether this Receiver (or the downstream pipeline) makes any use of the type annotations supplied on element and attribute events

Methods inherited from class net.sf.saxon.event.Builder

getBaseURI, getBuilderMonitor, getConfiguration, isTiming, reset, setBaseURI, setLineNumbering, setTiming

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Constructor Detail

DOMWriter

public DOMWriter()

Method Detail

setPipelineConfiguration

public void setPipelineConfiguration(PipelineConfiguration pipe)

Set the pipelineConfiguration

Specified by:

setPipelineConfiguration in interface Receiver

Overrides:

setPipelineConfiguration in class Builder

Parameters:

pipe - the pipeline configuration

getPipelineConfiguration

public PipelineConfiguration getPipelineConfiguration()

Get the pipeline configuration used for this document

Specified by:

getPipelineConfiguration in interface Receiver

Overrides:

getPipelineConfiguration in class Builder

Returns:

the pipeline configuration

setSystemId

public void setSystemId(String systemId)

Set the System ID of the destination tree

Specified by:

setSystemId in interface Result

Specified by:

setSystemId in interface Receiver

Overrides:

setSystemId in class Builder

Parameters:

systemId - the SystemId, that is, the document-uri.

setUnparsedEntity

public void setUnparsedEntity(String name,
                              String systemID,
                              String publicID)
                       throws XPathException

Notify an unparsed entity URI.

Parameters:

name - The name of the unparsed entity

systemID - The system identifier of the unparsed entity

publicID - The public identifier of the unparsed entity

Throws:

XPathException - if an error occurs

getSystemId

public String getSystemId()

Get the system identifier that was set with setSystemId.

Specified by:

getSystemId in interface Result

Overrides:

getSystemId in class Builder

Returns:

The system identifier that was set with setSystemId, or null if setSystemId was not called.

open

public void open()

Start of the document.

Specified by:

open in interface Receiver

Overrides:

open in class Builder

close

public void close()

End of the document.

Specified by:

close in interface Receiver

Overrides:

close in class Builder

startDocument

public void startDocument(int properties)
                   throws XPathException

Start of a document node.

Parameters:

properties - bit-significant integer indicating properties of the document node. The definitions of the bits are in class ReceiverOptions

Throws:

XPathException - if an error occurs

endDocument

public void endDocument()
                 throws XPathException

Notify the end of a document node

Throws:

XPathException - if an error occurs

startElement

public void startElement(NodeName nameCode,
                         SchemaType typeCode,
                         int locationId,
                         int properties)
                  throws XPathException

Start of an element.

Parameters:

nameCode - the name of the element.

typeCode - the type annotation of the element.

locationId - an integer which can be interpreted using a LocationProvider to return information such as line number and system ID. If no location information is available, the value zero is supplied.

properties - bit-significant properties of the element node. If there are no revelant properties, zero is supplied. The definitions of the bits are in class ReceiverOptions

Throws:

XPathException - if an error occurs

namespace

public void namespace(NamespaceBinding namespaceBinding,
                      int properties)
               throws XPathException

Description copied from interface: Receiver

Notify a namespace. Namespaces are notified after the startElement event, and before any children for the element. The namespaces that are reported are only required to include those that are different from the parent element. The events represent namespace declarations and undeclarations rather than in-scope namespace nodes: an undeclaration is represented by a namespace code of zero. If the sequence of namespace events contains two A namespace must not conflict with any namespaces already used for element or attribute names.

Parameters:

namespaceBinding - contains the namespace prefix and namespace URI

properties - The most important property is REJECT_DUPLICATES. If this property is set, the namespace declaration will be rejected if it conflicts with a previous declaration of the same prefix. If the property is not set, the namespace declaration will be ignored if it conflicts with a previous declaration. This reflects the fact that when copying a tree, namespaces for child elements are emitted before the namespaces of their parent element. Unfortunately this conflicts with the XSLT rule for complex content construction, where the recovery action in the event of conflicts is to take the namespace that comes last. XSLT therefore doesn't recover from this error:

Throws:

XPathException - if an error occurs

attribute

public void attribute(NodeName nameCode,
                      SimpleType typeCode,
                      CharSequence value,
                      int locationId,
                      int properties)
               throws XPathException

Description copied from interface: Receiver

Notify an attribute. Attributes are notified after the startElement event, and before any children. Namespaces and attributes may be intermingled.

Parameters:

nameCode - The name of the attribute

typeCode - The type of the attribute, as held in the name pool. The additional bit NodeInfo.IS_DTD_TYPE may be set to indicate a DTD-derived type.

value - the string value of the attribute

locationId - an integer which can be interpreted using a LocationProvider to return information such as line number and system ID. If no location information is available, the value zero is supplied.

properties - Bit significant value. The following bits are defined:

DISABLE_ESCAPING

Disable escaping for this attribute

NO_SPECIAL_CHARACTERS

Attribute value contains no special characters

Throws:

XPathException - if an error occurs

startContent

public void startContent()
                  throws XPathException

Description copied from interface: Receiver

Notify the start of the content, that is, the completion of all attributes and namespaces. Note that the initial receiver of output from XSLT instructions will not receive this event, it has to detect it itself. Note that this event is reported for every element even if it has no attributes, no namespaces, and no content.

Throws:

XPathException - if an error occurs

endElement

public void endElement()
                throws XPathException

End of an element.

Throws:

XPathException - if an error occurs

characters

public void characters(CharSequence chars,
                       int locationId,
                       int properties)
                throws XPathException

Character data.

Parameters:

chars - The characters

locationId - an integer which can be interpreted using a LocationProvider to return information such as line number and system ID. If no location information is available, the value zero is supplied.

properties - Bit significant value. The following bits are defined:

DISABLE_ESCAPING

Disable escaping for this text node

USE_CDATA

Output as a CDATA section

Throws:

XPathException - if an error occurs

processingInstruction

public void processingInstruction(String target,
                                  CharSequence data,
                                  int locationId,
                                  int properties)
                           throws XPathException

Handle a processing instruction.

Parameters:

target - The PI name. This must be a legal name (it will not be checked).

data - The data portion of the processing instruction

locationId - an integer which can be interpreted using a LocationProvider to return information such as line number and system ID. If no location information is available, the value zero is supplied.

properties - Additional information about the PI.

Throws:

XPathException - if an error occurs

comment

public void comment(CharSequence chars,
                    int locationId,
                    int properties)
             throws XPathException

Handle a comment.

Parameters:

chars - The content of the comment

locationId - an integer which can be interpreted using a LocationProvider to return information such as line number and system ID. If no location information is available, the value zero is supplied.

properties - Additional information about the comment.

Throws:

XPathException - if an error occurs

usesTypeAnnotations

public boolean usesTypeAnnotations()

Ask whether this Receiver (or the downstream pipeline) makes any use of the type annotations supplied on element and attribute events

Specified by:

usesTypeAnnotations in interface Receiver

Overrides:

usesTypeAnnotations in class Builder

Returns:

true if the Receiver makes any use of this information. If false, the caller may supply untyped nodes instead of supplying the type annotation

setNode

public void setNode(Node node)

Set the attachment point for the new subtree

Parameters:

node - the node to which the new subtree will be attached

setNextSibling

public void setNextSibling(Node nextSibling)

Set next sibling

Parameters:

nextSibling - the node, which must be a child of the attachment point, before which the new subtree will be created. If this is null the new subtree will be added after any existing children of the attachment point.

getCurrentRoot

public NodeInfo getCurrentRoot()

Get the current root node. This will normally be a document node, but if the root of the tree is an element node, it can be an element.

Overrides:

getCurrentRoot in class Builder

Returns:

the root of the tree that is currently being built, or that has been most recently built using this builder